205 Hardman Avenue South, South Saint Paul, MN 55075
Voice: (800) 899-5444 • Fax: (888) 552-8661
e-mail: customerservice@holtkoetter.com
www.holtkoetter.com
ASSEMBLY INSTRUCTIONS FOR
Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.
Bulbs manufactured in Germany by Osram GmbH. Final assembly by Holtkötter in South Saint Paul, MN.
Holtkötter
®
and Holtkötter Leuchten
®
are registered trademarks of Holtkötter. All Rights Reserved.
© Holtkötter
Bernie Series LED Wall Sconces
No. 8193*LED & No. 8195*LED
These low-voltage LED wall sconces come fully assembled and ready for installation.
IT IS FIRMLY RECOMMENDED THAT A LICENSED ELECTRICIAN
INSTALL THIS FIXTURE.
General Installation Instructions
1. Disconnect power before servicing.
2. Remove the universal crossbar strap from the back of
the sconce.
3. Mount the universal crossbar strap to the outlet box
before making the wire connections.
4. Connect the wires from the sconce with the wires in the
outlet box according to generally accepted electrical
standards.
5. Mount the backplate of the sconce to the crossbarstrap
and secure with finished screws.
Technical Specifications
Light Engine: Holtkötter PC Board LED 11-8 with 8x CREE XP-G LEDs
Optic / Reector: HoltkötterAluminumReectorø134x100with60˚x5mmOptics
Light Output: 1120Lumensequivalentto80WHalogen
Light Color: 2900Kelvin
Control/LED Driver/Dimmer: HoltkötterLEDDimmerwithfull-rangedimmingof<1%-100%
Maximum Current/Voltage: 1000mA&18V
System Power Consumption: 2...12Watt
Care Instructions
Use only a soft, dry cloth to clean. If necessary, a slightly damp, soft cloth can be used to spot
clean. Do not use common household cleaners on lamps or fixtures, as the lacquer on the
outside of the brass may be damaged as a result.
5
5
⁄
8
˝
5
5
⁄
8
˝
5
5
⁄
8
˝
5
5
⁄
8
˝
8193/8*LED
8195/8*LED
DetailofLEDReector
Kommentare zu diesen Handbüchern